[bug-pcl] What causes "error code -25"?

[David Brodbeck]

Thanks, Steve.  I really appreciate all your help.  GhostPCL is a great find
for us because we have a huge stock of plotfiles.  Previously we could only
plot them, or print them using an old Windows program called PrintGL.  With
GhostPCL, I've been able to write a web front end for viewing them and tie
it into our trouble ticket system.

> -----Original Message-----
> From: Stefan Kemper [mailto:stefan.kemper at artifex.com]
> Sent: Friday, November 12, 2004 2:27 PM
> To: David Brodbeck
> Cc: bug-pcl at ghostscript.com
> Subject: RE: [bug-pcl] What causes "error code -25"?
> 
> 
> This is a parse error of the BP command if you insert a semicolon this
> will fix it for now.  
> 
> 
> BP5,1,1," #1/LY04-063 09_Concrete (1)";INWU0NP256QL
> --------------------------------------^------------
> 
> Removing the control panel string will also work. 
> 
> BP5,1INWU0NP256QL
> 
> We'll get this fixed for the next release.
> 
> Thanks,
> Stefan
> 
> 
> On Fri, 2004-11-12 at 10:42, David Brodbeck wrote:
> > Thanks, Steve.  I've attached one of the problem files.  
> Here's the command
> > line:
> > 
> > /usr/local/bin/pcl6 -PRTL -sDEVICE=pbmraw "-J at PJL SET 
> PLOTSIZEROTATE=OFF"
> > -dNOPAUSE -dSAFER -sOutputFile=- -r40x40
> > 
> /export/shared/Plotfiles/Lay_04/051-100/Ly04-063/LY04-063-09_C
> oncrete.plt
> > 
> > > -----Original Message-----
> > > From: Stefan Kemper [mailto:stefan.kemper at artifex.com]
> > > Sent: Friday, November 12, 2004 1:31 PM
> > > To: David Brodbeck
> > > Cc: Bug-Pcl (E-mail)
> > > Subject: Re: [bug-pcl] What causes "error code -25"?
> > > 
> > > 
> > > Send the plot file and the command line used.
> > > You can send it too me directly if you don't want it published.
> > > 
> > > 
> > > On Fri, 2004-11-12 at 08:37, David Brodbeck wrote:
> > > > Sorry to post so many questions in short order, but I've 
> > > run into another
> > > > issue.  Some of our HPGL/2 plotfiles cause GhostPCL to 
> > > produce this error:
> > > > "Warning interpreter exited with error code -25"
> > > > When this happens, no image is produced.  What causes this 
> > > error?  I can
> > > > provide a plotfile that triggers it, if it will help.
> > > > 
> > > > ---
> > > > 
> > > > David Brodbeck, System Administrator
> > > > InterClean Equipment, Inc.
> > > > 3939 Bestech Drive Suite B
> > > > Ypsilanti, MI 48197
> > > > (734) 975-2967 x221
> > > > (734) 975-1646 (fax)
> > > >  
> > > > 
> > > > _______________________________________________
> > > > bug-pcl mailing list
> > > > bug-pcl at ghostscript.com
> > > > http://www.ghostscript.com/mailman/listinfo/bug-pcl
> > > > 
> > > 
> > 
> 
> _______________________________________________
> bug-pcl mailing list
> bug-pcl at ghostscript.com
> http://www.ghostscript.com/mailman/listinfo/bug-pcl
>