[gs-devel] bug? - questions about SVN 8818 xefitra
Leonardo
leonardo at artifex.com
Tue Jul 29 00:18:27 PDT 2008
Eric,
Generally we're replacing pswrite with ps2write.
Did you try it ?
Leo.
----- Original Message -----
From: "Eric Nichols" <havealoha at gmail.com>
To: <gs-devel at ghostscript.com>
Sent: Saturday, July 12, 2008 5:27 AM
Subject: [gs-devel] bug? - questions about SVN 8818
> You can find all the files referenced in this document at
> www.havealoha.com/psbug.tar.gz
>
> I run output from pcal through gs using device pswrite to preserve the
> diacritical marks amacron omacron and such (ISO-8859-4). pstoedit seems to
> choke
> on these "unable to map [c2]amacron from 224". Even without special
> characters
> in the pcal ps, 'pstoedit -f sk' makes awfully messed up, humanly
> unreadable
> output. After I put it through pswrite, pstoedit handles the pcal ps fine.
>
> Now using gs-svn things are breaking.
>
> Refering to the shell commands and output below. pstoedit makes
> aug-sk-oldgs-esp.ps fine but makes aug-sk-newgs.ps with errors "too much
> data:
> ignoring E0....." and the result is missing data. Is this a result of
> faulty
> gs
> pswrite data or the sketch plugin to pstoedit?
>
> Why does -sDEVICE=pswrite -r9000 make such a substantial file size
> difference
> between gs-esp 8.15.3 and gs 8.63? How do I get this resolution without
> the
> huge
> file size with gs 8.63?
>
> Why is this in the search path? I dont have these paths in my filesystem.
> Is
> there an option to disable these in .configure?
>
> Maybe the makefile could check if they exist before including them in the
> search
> path....?
>
> /usr/lib/DPS/outline/base : /usr/openwin/lib/X11/fonts/Type1 :
> /usr/openwin/lib/X11/fonts/TrueType
>
> Aloha
>
> Eric
>
> # cat /proc/version
> Linux version 2.6.18-6-686 (Debian 2.6.18.dfsg.1-18etch6)
> (dannf at debian.org)
> (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Fri Jun
> 6
> 22:22:11 UTC 2008
> #export set GS=/usr/local/bin/gs
> # gs -h
> GPL Ghostscript SVN PRE-RELEASE 8.63 (2008-03-01)
> Copyright (C) 2008 Artifex Software, Inc. All rights reserved.
> Usage: gs [switches] [file1.ps file2.ps ...]
> Most frequently used switches: (you can use # in place of =)
> -dNOPAUSE no pause after page | -q `quiet', fewer
> messages
> -g<width>x<height> page size in pixels | -r<res> pixels/inch
> resolution
> -sDEVICE=<devname> select device | -dBATCH exit after last file
> -sOutputFile=<file> select output file: - for stdout, |command for pipe,
> embed %d or %ld for page #
> Input formats: PostScript PostScriptLevel1 PostScriptLevel2
> PostScriptLevel3
> PDFDefault output device: x11alpha
> Available devices:
> alc1900 alc2000 alc4000 alc4100 alc8500 alc8600 alc9100 ap3250 appledmp
> atx23 atx24 atx38 bbox bit bitcmyk bitrgb bitrgbtags bj10e bj10v bj10vh
> bj200 bjc600 bjc800 bjc880j bjccmyk bjccolor bjcgray bjcmono bmp16
> bmp16m
> bmp256 bmp32b bmpgray bmpmono bmpsep1 bmpsep8 cairo ccr cdeskjet cdj1600
> cdj500 cdj550 cdj670 cdj850 cdj880 cdj890 cdj970 cdjcolor cdjmono cfax
> cgm24 cgm8 cgmmono chp2200 cif cljet5 cljet5c cljet5pr coslw2p coslwxl
> cp50 cups declj250 deskjet devicen dfaxhigh dfaxlow dj505j djet500
> djet500c dl2100 dnj650c epl2050 epl2050p epl2120 epl2500 epl2750 epl5800
> epl5900 epl6100 epl6200 eps9high eps9mid epson epsonc epswrite escp
> escpage faxg3 faxg32d faxg4 fmlbp fmpr fs600 gdi hl1240 hl1250 hl7x0
> hpdj1120c hpdj310 hpdj320 hpdj340 hpdj400 hpdj500 hpdj500c hpdj510
> hpdj520 hpdj540 hpdj550c hpdj560c hpdj600 hpdj660c hpdj670c hpdj680c
> hpdj690c hpdj850c hpdj855c hpdj870c hpdj890c hpdjplus hpdjportable
> ibmpro
> ijs imagen imdi inferno iwhi iwlo iwlq jetp3852 jj100 jpeg jpegcmyk
> jpeggray la50 la70 la75 la75plus laserjet lbp310 lbp320 lbp8 lex2050
> lex3200 lex5700 lex7000 lips2p lips3 lips4 lips4v lj250 lj3100sw lj4dith
> lj4dithp lj5gray lj5mono ljet2p ljet3 ljet3d ljet4 ljet4d ljet4pjl
> ljetplus ln03 lp1800 lp1900 lp2000 lp2200 lp2400 lp2500 lp2563 lp3000c
> lp7500 lp7700 lp7900 lp8000 lp8000c lp8100 lp8200c lp8300c lp8300f
> lp8400f lp8500c lp8600 lp8600f lp8700 lp8800c lp8900 lp9000b lp9000c
> lp9100 lp9200b lp9200c lp9300 lp9400 lp9500c lp9600 lp9600s lp9800c
> lps4500 lps6500 lq850 lx5000 lxm3200 lxm5700m m8510 mag16 mag256
> md1xMono
> md2k md50Eco md50Mono md5k mgr4 mgr8 mgrgray2 mgrgray4 mgrgray8 mgrmono
> miff24 mj500c mj6000c mj700v2c mj8000c ml600 necp6 npdl nullpage oce9050
> oki182 oki4w okiibm omni oprp opvp paintjet pam pbm pbmraw pcl3 pcx16
> pcx24b pcx256 pcx2up pcxcmyk pcxgray pcxmono pdfwrite pgm pgmraw pgnm
> pgnmraw photoex picty180 pj pjetxl pjxl pjxl300 pkm pkmraw pksm pksmraw
> plan9bm png16 png16m png256 png48 pngalpha pnggray pngmono pnm pnmraw
> ppm
> ppmraw pr1000 pr1000_4 pr150 pr201 ps2write psdcmyk psdrgb psgray psmono
> psrgb pswrite pxlcolor pxlmono r4081 rinkj rpdl samsunggdi sgirgb sj48
> spotcmyk st800 stcolor sunhmono svg t4693d2 t4693d4 t4693d8 tek4696
> tiff12nc tiff24nc tiff32nc tiffcrle tiffg3 tiffg32d tiffg4 tiffgray
> tifflzw tiffpack tiffsep uniprint wtscmyk wtsimdi x11 x11alpha x11cmyk
> x11cmyk2 x11cmyk4 x11cmyk8 x11gray2 x11gray4 x11mono x11rg16x x11rg32x
> xcf xes
> Search path:
> . : %rom%lib/ : /usr/local/share/ghostscript/8.63/lib :
> /usr/local/share/ghostscript/8.63/Resource :
> /usr/local/share/ghostscript/fonts :
> /usr/local/share/fonts/default/ghostscript :
> /usr/local/share/fonts/default/Type1 :
> /usr/local/share/fonts/default/TrueType : /usr/lib/DPS/outline/base :
> /usr/openwin/lib/X11/fonts/Type1 : /usr/openwin/lib/X11/fonts/TrueType :
> /usr/share/cups/fonts
> Initialization files are compiled into the executable.
> For more information, see /usr/local/share/ghostscript/8.63/doc/Use.htm.
> Please report bugs to bugs.ghostscript.com.
> # pstoedit -gstest
> pstoedit: version 3.44 / DLL interface 108 (build Mar 11 2006 - release
> build - g++ 4.0.3 20060304 (prerelease) (Debian 4.0.2-10)) : Copyright (C)
> 1993 - 2006 Wolfgang Glunz
> now calling the interpreter via: /usr/local/bin/gs -q -dDELAYBIND
> -dWRITESYSTEMDICT -dNODISPLAY -dNOEPS quit.ps
> # pstoedit -help -v
> pstoedit: version 3.44 / DLL interface 108 (build Mar 11 2006 - release
> build - g++ 4.0.3 20060304 (prerelease) (Debian 4.0.2-10)) : Copyright (C)
> 1993 - 2006 Wolfgang Glunz
> pstoedit : path to myself:pstoedit 17 /usr/bin/pstoedit
> loading plugins from /usr/bin using suffix: .so
> loading plugins from /usr/lib/pstoedit using suffix: .so
> loading plugin: /usr/lib/pstoedit/libp2edrvmagick++.so
> dlopening /usr/lib/pstoedit/libp2edrvmagick++.so
> loading dynamic library /usr/lib/pstoedit/libp2edrvmagick++.so completed
> successfully
> loading plugin: /usr/lib/pstoedit/libp2edrvlplot.so
> dlopening /usr/lib/pstoedit/libp2edrvlplot.so
> loading dynamic library /usr/lib/pstoedit/libp2edrvlplot.so completed
> successfully
> loading plugin: /usr/lib/pstoedit/libp2edrvstd.so
> dlopening /usr/lib/pstoedit/libp2edrvstd.so
> loading dynamic library /usr/lib/pstoedit/libp2edrvstd.so completed
> successfully[ -include : string : name of an option
> include file]
> [ -df : string : default replacement font for
> raster fonts]
> [ -nomaptoisolatin1 : boolean : don't map to ISO-Latin 1
> encoding]
> [ -dis : boolean : let GhostScript display the
> file
> during conversion]
> [ -nq : boolean : don't quit GhostScript after
> PostScript processing - for debugging only]
> [ -nc : boolean : normally curves are shown as
> curves if the output format does support it. This options forces curves to
> be always converted to line segments.]
> [ -nsp : boolean : normally subpathes are used if
> the output format support them. This option turns off subpathes.]
> [ -mergelines : boolean : merge adjacent pathes if one is
> a
> stroke and the other is a fill. This depends on the capabilities of the
> selected output format]
> [ -filledrecttostroke : boolean : convert filled rectangles to a
> stroke]
> [ -mergetext : boolean : merge adjacent text pieces]
> [ -dt : boolean : draw text, i.e. convert text to
> polygons]
> [ -adt : boolean : automatic draw text. This draws
> text only for text that uses fonts with non standard encodings]
> [ -ndt : boolean : fully disable any
> "intelligence"
> for drawing text]
> [ -correctdefinefont : boolean : apply some "corrective" actions
> to definefont - use this for ChemDraw generated PostScript files]
> [ -pti : boolean : precision text - individual.
> Places text character by character - but only if non standard chararater
> widths are used]
> [ -pta : boolean : precision text - always. Places
> text character by character]
> [ -xscale : double : scale by a factor in
> x-direction]
> [ -yscale : double : scale by a factor in
> y-direction]
> [ -xshift : double : shift image in x-direction]
> [ -yshift : double : shift image in y-direction]
> [ -centered : boolean : center image before scaling or
> shifting]
> [ -split : boolean : split multipage documents into
> single pages]
> [ -v : boolean : turns on verbose mode]
> [ -usebbfrominput : boolean : extract BoundingBox from input
> file rather than determining it during processing]
> [ -ssp : boolean : simulate subpaths]
> [ -uchar : string : when a character cannot be
> mapped
> to one of the standard encoding vector, use this as replacement]
> [ -dontloadplugins : boolean : internal option - not relevant
> for normal user]
> [ -nb : boolean : use old NOBIND instead of
> DELAYBIND - try this if GhostScript has problems]
> [ -page : integer : extract a specific page: 0
> means
> all pages]
> [ -flat : double : the precision used for
> approximating curves by lines if needed]
> [ -sclip : boolean : simulate clipping - probably
> you
> need to set this if you use -dt]
> [ -ups : boolean : write text as plain string
> instead of hex string in intermediate format - normally useful for trouble
> shooting and debugging only.]
> [ -rgb : boolean : use RGB colors instead of CMYK]
> [ -noclip : boolean : don't use clipping (relevant
> only
> if output format supports clipping at all)]
> [ -t2fontsast1 : boolean : handle T2 fonts (often come as
> embedded fonts in PDF files) same as T1]
> [ -keep : boolean : keep the intermediate files
> produced by pstoedit - for debug purposes only]
> [ -gstest : boolean : perform a basic test for the
> interworking with GhostScript]
> [ -pscover : boolean : perform coverage statistics
> about
> the pstoedit PostScript proloque - for debug and test only]
> [ -nfr : boolean : don't replace non standard
> encoded fonts with a replacement font]
> [ -glyphs : boolean : pass glyph names to output
> format
> driver]
> [ -rotate : integer : rotate the image]
> [ -fontmap : string : use a font mapping from a file]
> [ -pagesize : string : set page size (e.g. a4) - used
> by
> TK and libplot output format driver only]
> [ -fromgui : boolean : internal - not for normal user]
> [ -help : boolean : show the help information]
> [ -doculong : boolean : show help information in TeX
> format - long version]
> [ -docushort : boolean : show help information in TeX
> format - short version]
> [ -dumphelp : boolean : show all options of all drivers
> in TeX format]
> [ -bo : boolean : backend only - This option is
> not
> useful for a "normal" user. It is useful for programs which use pstoedit
> as
> output format generator and can provide an input file which adheres to
> pstoedit's internal dump format.]
> [ -psarg : string : additional arguments to be
> passed
> to GhostScript directly]
> -f : string : target format identifier
> [ -gsregbase : string : use this registry key as a
> subkey
> to search for GhostScript]
> [ inputfile [outputfile] ]
> GS is set to:/usr/local/bin/gs
> Value found is:/usr/local/bin/gs
> Default interpreter is /usr/local/bin/gs
> Available formats :
> psf: .fps: Flattened PostScript (no
> curves) (built-in)
> -------------------------------------------
> ps: .spsc: Simplified PostScript with
> curves (built-in)
> -------------------------------------------
> debug: .dbg: for test purposes (built-in)
> -------------------------------------------
> dump: .dbg: for test purposes (same as
> debug) (built-in)
> -------------------------------------------
> gs: .gs: any device that GhostScript
> provides
> - use gs:format, e.g. gs:pdfwrite (built-in)
> -------------------------------------------
> ps2ai: .ai: Adobe Illustrator via ps2ai.ps of
> GhostScript (built-in)
> -------------------------------------------
> magick: ....: MAGICK driver
> (/usr/lib/pstoedit/libp2edrvmagick++.so)
> -------------------------------------------
> gmfa: .meta: ASCII GNU metafile
> (/usr/lib/pstoedit/libp2edrvlplot.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ plotformat : string : plotutil format to generate]
> -------------------------------------------
> gmfb: .meta: binary GNU metafile
> (/usr/lib/pstoedit/libp2edrvlplot.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot: .plot: GNU libplot output types, e.g.
> plot:type X (/usr/lib/pstoedit/libp2edrvlplot.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-pnm: .pnm: pnm via GNU libplot
> (/usr/lib/pstoedit/libp2edrvlplot.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-cgm: .cgm: cgm via GNU libplot
> (/usr/lib/pstoedit/libp2edrvlplot.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-ai: .ai: ai via GNU libplot
> (/usr/lib/pstoedit/libp2edrvlplot.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-svg: .svg: svg via GNU libplot
> (/usr/lib/pstoedit/libp2edrvlplot.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-ps: .ps: ps via GNU libplot
> (/usr/lib/pstoedit/libp2edrvlplot.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-fig: .fig: fig via GNU libplot
> (/usr/lib/pstoedit/libp2edrvlplot.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-pcl: .pcl: pcl via GNU libplot
> (/usr/lib/pstoedit/libp2edrvlplot.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-hpgl: .hpgl: hpgl via GNU libplot
> (/usr/lib/pstoedit/libp2edrvlplot.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ plotformat : string : plotutil format to generate]
> -------------------------------------------
> plot-tek: .tek: tek via GNU libplot
> (/usr/lib/pstoedit/libp2edrvlplot.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ plotformat : string : plotutil format to generate]
> -------------------------------------------
> sample: .sam: sample driver: if you don't want to
> see this, uncomment the corresponding line in makefile and make again
> (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -sampleoption : integer : just an example]
> -------------------------------------------
> idraw: .idraw: Interviews draw format (EPS)
> (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> fig: .fig: .fig format for xfig
> (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -startdepth : integer : Set the initial depth (default
> 999)]
> [ -metric : boolean : Switch to centimeter display
> (default inches)]
> [ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use
> this if you also use this option with xfig]
> [ -depth : integer : Set the page depth in inches
> (default 11)]
> -------------------------------------------
> xfig: .fig: .fig format for xfig
> (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -startdepth : integer : Set the initial depth (default
> 999)]
> [ -metric : boolean : Switch to centimeter display
> (default inches)]
> [ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use
> this if you also use this option with xfig]
> [ -depth : integer : Set the page depth in inches
> (default 11)]
> -------------------------------------------
> tgif: .obj: Tgif .obj format
> (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -ta : boolean : text as attribute]
> -------------------------------------------
> gnuplot: .gnuplot: gnuplot format
> (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> svm: .svm: StarView/OpenOffice.org
> metafile (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -m : boolean : map to Arial]
> [ -nf : boolean : emulate narrow fonts]
> -------------------------------------------
> tk: .tk: tk and/or tk applet source
> code (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -R : boolean : swap HW]
> [ -I : boolean : no impress]
> [ -n : string : tagnames]
> -------------------------------------------
> gschem: .gschem: gschem format
> (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> pcbfill: .pcbfill: pcb format with fills
> (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> pcb: .pcb: pcb format
> (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> pcbi: .pcb: engrave data - insulate/PCB
> format (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> hpgl: .hpgl: HPGL code
> (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -pen : boolean : plotter is pen plotter]
> [ -pencolors : integer : number of pen colors available]
> [ -filltype : string : select fill type e.g. FT 1]
> [ -rot90 : boolean : rotate hpgl by 90 degrees]
> [ -rot180 : boolean : rotate hpgl by 180 degrees]
> [ -rot270 : boolean : rotate hpgl by 270 degrees]
> -------------------------------------------
> pic: .pic: PIC format for troff et.al.
> (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -troff : boolean : troff mode (default is groff)]
> [ -landscape : boolean : landscape output]
> [ -portrait : boolean : portrait output]
> [ -keepfont : boolean : print unrecognized literally]
> [ -text : boolean : try not to make pictures from
> running text]
> [ -debug : boolean : enable debug output]
> -------------------------------------------
> noixml: .xml: Nemetschek NOI XML format
> (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -r : string : Allplan resource file]
> [ -bsl : integer : Bezier Split Level (default 3)]
> -------------------------------------------
> latex2e: .tex: LaTeX2e picture format
> (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -integers : boolean : round all coordinates to the
> nearest integer]
> -------------------------------------------
> mma: .m: Mathematica Graphics
> (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -eofillfills : boolean : Filling is used for eofill
> (default is not to fill)]
> -------------------------------------------
> asy: .asy: Asymptote Format
> (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> mpost: .mp: MetaPost Format
> (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> sk: .sk: Sketch Format
> (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> text: .txt: text in different forms
> (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -height : integer : page height in terms of
> characters]
> [ -width : integer : page width in terms of
> characters]
> [ -dump : boolean : dump text pieces]
> -------------------------------------------
> kil: .kil: .kil format for Kontour
> (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> pdf: .pdf: Adobe's Portable Document
> Format (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> java2: .java2: java 2 source code
> (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ java class name : string : name of java class to generate]
> -------------------------------------------
> java1: .java: java 1 applet source code
> (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ java class name : string : name of java class to generate]
> -------------------------------------------
> dxf: .dxf: CAD exchange format
> (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -polyaslines : boolean : use LINE instead of POLYLINE in
> DXF]
> [ -mm : boolean : use mm coordinates instead of
> points in DXF (mm=pt/72*25.4)]
> [ -ctl : boolean : map colors to layers]
> [ -splineaspolyline : boolean : approximate splines with
> PolyLines (only for -f dxf_s)]
> [ -splineasnurb : boolean : experimental (only for -f
> dxf_s)]
> [ -splineasbspline : boolean : experimental (only for -f
> dxf_s)]
> [-splineassinglespline : boolean : experimental (only for -f
> dxf_s)]
> [-splineasmultispline : boolean : experimental (only for -f
> dxf_s)]
> [ -splineasbezier : boolean : use Bezier splines in DXF
> format
> (only for -f dxf_s)]
> [ -splineprecision : integer : number of samples to take from
> spline curve when doing approximation with -splineaspolyline or
> -splineasmultispline - should be >=2 (default 5)]
> -------------------------------------------
> dxf_s: .dxf: CAD exchange format with
> splines (/usr/lib/pstoedit/libp2edrvstd.so)
> This driver supports the following additional options: (specify using -f
> "format:-option1 -option2")
> [ -polyaslines : boolean : use LINE instead of POLYLINE in
> DXF]
> [ -mm : boolean : use mm coordinates instead of
> points in DXF (mm=pt/72*25.4)]
> [ -ctl : boolean : map colors to layers]
> [ -splineaspolyline : boolean : approximate splines with
> PolyLines (only for -f dxf_s)]
> [ -splineasnurb : boolean : experimental (only for -f
> dxf_s)]
> [ -splineasbspline : boolean : experimental (only for -f
> dxf_s)]
> [-splineassinglespline : boolean : experimental (only for -f
> dxf_s)]
> [-splineasmultispline : boolean : experimental (only for -f
> dxf_s)]
> [ -splineasbezier : boolean : use Bezier splines in DXF
> format
> (only for -f dxf_s)]
> [ -splineprecision : integer : number of samples to take from
> spline curve when doing approximation with -splineaspolyline or
> -splineasmultispline - should be >=2 (default 5)]
> -------------------------------------------
> rpl: .rpl: Real3D Programming Language
> Format (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> rib: .rib: RenderMan Interface Bytestream
> (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> lwo: .lwo: LightWave 3D Object Format
> (/usr/lib/pstoedit/libp2edrvstd.so)
> -------------------------------------------
> # /usr/bin/gs-esp -sDEVICE=pswrite -r9000x9000 -sOutputFile=
> aug-pswrite-oldgs-esp.ps aug.ps <quit
> ESP Ghostscript 815.03 (2006-08-25)
> Copyright (C) 2004 artofcode LLC, Benicia, CA. All rights reserved.
> This software comes with NO WARRANTY: see the file PUBLIC for details.
> Warning: the map file cidfmap was not found.
> Loading URWChanceryL-MediItal font from
> /var/lib/defoma/gs.d/dirs/fonts/z003034l.pfb... 2597272 1128286 2120028
> 803363 1 done.
> Loading NimbusSanL-ReguCond font from
> /var/lib/defoma/gs.d/dirs/fonts/n019043l.pfb... 2613936 1228929 2120028
> 807345 1 done.
> Loading NimbusRomNo9L-Medi font from
> /var/lib/defoma/gs.d/dirs/fonts/n021004l.pfb... 2690888 1380992 2120028
> 818583 1 done.
>>>showpage, press <return> to continue<<
> GS># gs -sDEVICE=pswrite -r900x900 -sOutputFile=aug-pswrite-newgs.ps
> aug.ps<quit
> GPL Ghostscript SVN PRE-RELEASE 8.63 (2008-03-01)
> Copyright (C) 2008 Artifex Software, Inc. All rights reserved.
> This software comes with NO WARRANTY: see the file PUBLIC for details.
> Can't find (or can't open) font file z003034l.pfb.
> Loading URWChanceryL-MediItal font from
> %rom%Resource/Font/URWChanceryL-MediItal... 2713332 1145502 12528644
> 11204638 1 done.
> Can't find (or can't open) font file n019043l.pfb.
> Loading NimbusSanL-ReguCond font from
> %rom%Resource/Font/NimbusSanL-ReguCond... 2693236 1105387 12528644
> 11200194
> 1 done.
> Can't find (or can't open) font file n021004l.pfb.
> Loading NimbusRomNo9L-Medi font from
> %rom%Resource/Font/NimbusRomNo9L-Medi... 2713332 1187499 12528644 11212059
> 1
> done.
>>>showpage, press <return> to continue<<
> # pstoedit -f sk -v -keep -ups aug-pswrite-oldgs-esp.ps >
> aug-sk-oldgs-esp.sk
> pstoedit: version 3.44 / DLL interface 108 (build Mar 11 2006 - release
> build - g++ 4.0.3 20060304 (prerelease) (Debian 4.0.2-10)) : Copyright (C)
> 1993 - 2006 Wolfgang Glunz
> pstoedit : path to myself:pstoedit 17 /usr/bin/pstoedit
> loading plugins from /usr/bin using suffix: .so
> loading plugins from /usr/lib/pstoedit using suffix: .so
> loading plugin: /usr/lib/pstoedit/libp2edrvmagick++.so
> dlopening /usr/lib/pstoedit/libp2edrvmagick++.so
> loading dynamic library /usr/lib/pstoedit/libp2edrvmagick++.so completed
> successfully
> loading plugin: /usr/lib/pstoedit/libp2edrvlplot.so
> dlopening /usr/lib/pstoedit/libp2edrvlplot.so
> loading dynamic library /usr/lib/pstoedit/libp2edrvlplot.so completed
> successfully
> loading plugin: /usr/lib/pstoedit/libp2edrvstd.so
> dlopening /usr/lib/pstoedit/libp2edrvstd.so
> loading dynamic library /usr/lib/pstoedit/libp2edrvstd.so completed
> successfullypath to myself: /usr/bin/pstoedit
> pstoedit home directory : /usr/bin
> pstoedit data directory : /usr/share/pstoedit
> verbose mode turned on
>
> GS is set to:/usr/local/bin/gs
> Value found is:/usr/local/bin/gs
> first trying registry for common/GS_LIB
> still not found an entry - now trying GS_LIB
> nothing found so far, trying default
> now calling the interpreter via: /usr/local/bin/gs -dDELAYBIND
> -dWRITESYSTEMDICT -dESTACKPRINT -dNODISPLAY -dNOEPS
> /usr/src/pcal-4.11.0.custom/hilo/ps/psinB6FBln
> working on filled path 2890 with 13 elements
> ..
> more of the same messages
> ..
> page 2 is greater than expected maximum number of pages 1
> postprocessing the interpreter output finished
> # pstoedit -f sk -v -keep -ups aug-pswrite-newgs.ps > aug-sk-newgs.sk
> pstoedit: version 3.44 / DLL interface 108 (build Mar 11 2006 - release
> build - g++ 4.0.3 20060304 (prerelease) (Debian 4.0.2-10)) : Copyright (C)
> 1993 - 2006 Wolfgang Glunz
> pstoedit : path to myself:pstoedit 17 /usr/bin/pstoedit
> loading plugins from /usr/bin using suffix: .so
> loading plugins from /usr/lib/pstoedit using suffix: .so
> loading plugin: /usr/lib/pstoedit/libp2edrvmagick++.so
> dlopening /usr/lib/pstoedit/libp2edrvmagick++.so
> loading dynamic library /usr/lib/pstoedit/libp2edrvmagick++.so completed
> successfully
> loading plugin: /usr/lib/pstoedit/libp2edrvlplot.so
> dlopening /usr/lib/pstoedit/libp2edrvlplot.so
> loading dynamic library /usr/lib/pstoedit/libp2edrvlplot.so completed
> successfully
> loading plugin: /usr/lib/pstoedit/libp2edrvstd.so
> dlopening /usr/lib/pstoedit/libp2edrvstd.so
> loading dynamic library /usr/lib/pstoedit/libp2edrvstd.so completed
> successfullypath to myself: /usr/bin/pstoedit
> pstoedit home directory : /usr/bin
> pstoedit data directory : /usr/share/pstoedit
> verbose mode turned on
>
> GS is set to:/usr/local/bin/gs
> Value found is:/usr/local/bin/gs
> first trying registry for common/GS_LIB
> still not found an entry - now trying GS_LIB
> nothing found so far, trying default
> now calling the interpreter via: /usr/local/bin/gs -dDELAYBIND
> -dWRITESYSTEMDICT -dESTACKPRINT -dNODISPLAY -dNOEPS
> /usr/src/pcal-4.11.0.custom/hilo/ps/psinJDYAoG
> too much data: ignoring 01
> ..
> more of the same messages
> ..
> page 2 is greater than expected maximum number of pages 1
> postprocessing the interpreter output finished
> #
>
--------------------------------------------------------------------------------
> _______________________________________________
> gs-devel mailing list
> gs-devel at ghostscript.com
> http://www.ghostscript.com/mailman/listinfo/gs-devel
>
More information about the gs-devel
mailing list