00:00.27 Opened logfile log/20131128. 00:00.27 --- Saved uptime records. 00:03.46 >>> Noldorin has signed off IRC (Quit: Computer has gone to sleep.) [#ghostscript] 00:10.06 henrys: You can code the excel support then :) 00:12.55 I'm on it 00:15.43 >>> join/#ghostscript Noldorin (~noldorin@unaffiliated/noldorin) 00:16.13 Chans: (ghostbot) in:#ghostscript 00:26.58 FORK(2633) --- fork starting for 'RSSFeeds', PID == 2633, bot_pid == 2373 --- 00:26.59 FORK(2633) !ERROR! cannot load my module: RSSFeeds 00:26.59 FORK(2633) fork: took 2s for RSSFeeds. 00:26.59 FORK(2633) --- fork finished for 'RSSFeeds' --- 00:51.37 >>> join/#ghostscript ray_laptop (~chatzilla@cpe-23-243-45-174.socal.res.rr.com) 00:53.40 >>> ray_laptop has signed off IRC (Client Quit) [#ghostscript] 00:57.18 FORK(20433) --- fork starting for 'RSSFeeds', PID == 20433, bot_pid == 2373 --- 00:57.19 FORK(20433) !ERROR! cannot load my module: RSSFeeds 00:57.19 FORK(20433) fork: took 2s for RSSFeeds. 00:57.19 FORK(20433) --- fork finished for 'RSSFeeds' --- 00:57.57 Seen: Flushed 2 entries. 01:00.47 --- Saved uptime records. 01:04.37 Chans: (ghostbot) in:#ghostscript 01:15.27 ircCheck: possible lost in space; checking.Thu Nov 28 01:15:27 2013 01:15.27 >ghostbot< TEST 01:15.27 IRCTEST: Yes, we're alive. 01:20.35 Chans: (ghostbot) in:#ghostscript 01:28.06 FORK(28360) --- fork starting for 'RSSFeeds', PID == 28360, bot_pid == 2373 --- 01:28.07 FORK(28360) !ERROR! cannot load my module: RSSFeeds 01:28.07 FORK(28360) fork: took 2s for RSSFeeds. 01:28.07 FORK(28360) --- fork finished for 'RSSFeeds' --- 01:46.45 LOG: last message repeated 3 times 01:46.45 !WARN! PERL: readdir() attempted on invalid dirhandle DEBIAN at ./src/IRC/Schedulers.pl line 862. 01:46.45 !WARN! PERL: closedir() attempted on invalid dirhandle DEBIAN at ./src/IRC/Schedulers.pl line 869. 01:53.15 Chans: (ghostbot) in:#ghostscript 01:58.16 FORK(7136) --- fork starting for 'RSSFeeds', PID == 7136, bot_pid == 2373 --- 01:58.17 FORK(7136) !ERROR! cannot load my module: RSSFeeds 01:58.17 FORK(7136) fork: took 2s for RSSFeeds. 01:58.17 FORK(7136) --- fork finished for 'RSSFeeds' --- 02:01.25 --- Saved uptime records. 02:09.25 Chans: (ghostbot) in:#ghostscript 02:20.25 ircCheck: possible lost in space; checking.Thu Nov 28 02:20:25 2013 02:20.25 >ghostbot< TEST 02:20.25 IRCTEST: Yes, we're alive. 02:25.37 Chans: (ghostbot) in:#ghostscript 02:29.08 FORK(28475) --- fork starting for 'RSSFeeds', PID == 28475, bot_pid == 2373 --- 02:29.09 FORK(28475) !ERROR! cannot load my module: RSSFeeds 02:29.09 FORK(28475) fork: took 2s for RSSFeeds. 02:29.09 FORK(28475) --- fork finished for 'RSSFeeds' --- 02:59.57 FORK(19173) --- fork starting for 'RSSFeeds', PID == 19173, bot_pid == 2373 --- 02:59.58 FORK(19173) !ERROR! cannot load my module: RSSFeeds 02:59.58 FORK(19173) fork: took 1s for RSSFeeds. 02:59.58 FORK(19173) --- fork finished for 'RSSFeeds' --- 03:01.37 --- Saved uptime records. 03:13.27 Chans: (ghostbot) in:#ghostscript 03:17.54 >>> join/#ghostscript tkamppeter_ (~till@p5DDBBCA7.dip0.t-ipconnect.de) 03:21.15 >>> tkamppeter has signed off IRC (Ping timeout: 245 seconds) [#ghostscript] 03:25.07 ircCheck: possible lost in space; checking.Thu Nov 28 03:25:07 2013 03:25.07 >ghostbot< TEST 03:25.08 IRCTEST: Yes, we're alive. 03:30.19 Chans: (ghostbot) in:#ghostscript 03:30.30 FORK(3362) --- fork starting for 'RSSFeeds', PID == 3362, bot_pid == 2373 --- 03:30.31 FORK(3362) !ERROR! cannot load my module: RSSFeeds 03:30.31 FORK(3362) fork: took 2s for RSSFeeds. 03:30.31 FORK(3362) --- fork finished for 'RSSFeeds' --- 03:59.20 LOG: last message repeated 3 times 03:59.20 >>> Noldorin has signed off IRC (Quit: Computer has gone to sleep.) [#ghostscript] 04:00.40 FORK(8104) --- fork starting for 'RSSFeeds', PID == 8104, bot_pid == 2373 --- 04:00.41 FORK(8104) !ERROR! cannot load my module: RSSFeeds 04:00.41 FORK(8104) fork: took 2s for RSSFeeds. 04:00.41 FORK(8104) --- fork finished for 'RSSFeeds' --- 04:01.29 Chans: (ghostbot) in:#ghostscript 04:01.49 --- Saved uptime records. 04:18.09 Chans: (ghostbot) in:#ghostscript 04:28.29 ircCheck: possible lost in space; checking.Thu Nov 28 04:28:29 2013 04:28.29 >ghostbot< TEST 04:28.29 IRCTEST: Yes, we're alive. 04:30.47 FORK(15801) --- fork starting for 'RSSFeeds', PID == 15801, bot_pid == 2373 --- 04:30.48 FORK(15801) !ERROR! cannot load my module: RSSFeeds 04:30.48 FORK(15801) fork: took 1s for RSSFeeds. 04:30.48 FORK(15801) --- fork finished for 'RSSFeeds' --- 04:33.37 Chans: (ghostbot) in:#ghostscript 05:01.07 FORK(27802) --- fork starting for 'RSSFeeds', PID == 27802, bot_pid == 2373 --- 05:01.08 FORK(27802) !ERROR! cannot load my module: RSSFeeds 05:01.08 FORK(27802) fork: took 1s for RSSFeeds. 05:01.08 FORK(27802) --- fork finished for 'RSSFeeds' --- 05:01.57 --- Saved uptime records. 05:05.17 Chans: (ghostbot) in:#ghostscript 05:31.18 FORK(3912) --- fork starting for 'RSSFeeds', PID == 3912, bot_pid == 2373 --- 05:31.19 FORK(3912) !ERROR! cannot load my module: RSSFeeds 05:31.19 FORK(3912) fork: took 2s for RSSFeeds. 05:31.19 FORK(3912) --- fork finished for 'RSSFeeds' --- 05:31.27 ircCheck: possible lost in space; checking.Thu Nov 28 05:31:27 2013 05:31.27 >ghostbot< TEST 05:31.27 IRCTEST: Yes, we're alive. 05:36.37 Chans: (ghostbot) in:#ghostscript 05:47.27 !WARN! PERL: readdir() attempted on invalid dirhandle DEBIAN at ./src/IRC/Schedulers.pl line 862. 05:47.27 !WARN! PERL: closedir() attempted on invalid dirhandle DEBIAN at ./src/IRC/Schedulers.pl line 869. 05:52.27 Chans: (ghostbot) in:#ghostscript 06:01.19 >>> henrys has signed off IRC (Quit: henrys) [#ghostscript] 06:02.07 FORK(16487) --- fork starting for 'RSSFeeds', PID == 16487, bot_pid == 2373 --- 06:02.08 FORK(16487) !ERROR! cannot load my module: RSSFeeds 06:02.08 FORK(16487) fork: took 1s for RSSFeeds. 06:02.08 FORK(16487) --- fork finished for 'RSSFeeds' --- 06:02.17 --- Saved uptime records. 06:08.37 Chans: (ghostbot) in:#ghostscript 06:32.17 FORK(23070) LOG: last message repeated 3 times 06:32.17 FORK(23070) --- fork starting for 'RSSFeeds', PID == 23070, bot_pid == 2373 --- 06:32.18 FORK(23070) !ERROR! cannot load my module: RSSFeeds 06:32.18 FORK(23070) fork: took 1s for RSSFeeds. 06:32.18 FORK(23070) --- fork finished for 'RSSFeeds' --- 06:35.07 LOG: last message repeated 3 times 06:35.07 ircCheck: possible lost in space; checking.Thu Nov 28 06:35:07 2013 06:35.07 >ghostbot< TEST 06:35.07 IRCTEST: Yes, we're alive. 06:40.45 Chans: (ghostbot) in:#ghostscript 07:02.25 --- Saved uptime records. 07:02.55 FORK(1854) --- fork starting for 'RSSFeeds', PID == 1854, bot_pid == 2373 --- 07:02.57 FORK(1854) !ERROR! cannot load my module: RSSFeeds 07:02.57 FORK(1854) fork: took 2s for RSSFeeds. 07:02.57 FORK(1854) --- fork finished for 'RSSFeeds' --- 07:12.35 Chans: (ghostbot) in:#ghostscript 07:17.30 >>> join/#ghostscript mvrhel_laptop (~chatzilla@174.47.67.2) 07:19.04 >>> chrisl_away materializes into chrisl 07:28.45 Chans: (ghostbot) in:#ghostscript 07:33.06 FORK(9383) --- fork starting for 'RSSFeeds', PID == 9383, bot_pid == 2373 --- 07:33.07 FORK(9383) !ERROR! cannot load my module: RSSFeeds 07:33.07 FORK(9383) fork: took 2s for RSSFeeds. 07:33.07 FORK(9383) --- fork finished for 'RSSFeeds' --- 07:39.35 ircCheck: possible lost in space; checking.Thu Nov 28 07:39:35 2013 07:39.35 >ghostbot< TEST 07:39.35 IRCTEST: Yes, we're alive. 07:44.39 Chans: (ghostbot) in:#ghostscript 07:47.28 >>> join/#ghostscript kens (~Miranda@93.182.125.91.dyn.plus.net) 08:01.59 Chans: (ghostbot) in:#ghostscript 08:02.49 --- Saved uptime records. 08:03.20 FORK(12407) --- fork starting for 'RSSFeeds', PID == 12407, bot_pid == 2373 --- 08:03.21 FORK(12407) !ERROR! cannot load my module: RSSFeeds 08:03.21 FORK(12407) fork: took 2s for RSSFeeds. 08:03.21 FORK(12407) --- fork finished for 'RSSFeeds' --- 08:17.59 Chans: (ghostbot) in:#ghostscript 08:22.34 >>> mvrhel_laptop has signed off IRC (Quit: ChatZilla 0.9.90.1 [Firefox 25.0.1/20131112160018]) [#ghostscript] 08:33.40 FORK(25380) --- fork starting for 'RSSFeeds', PID == 25380, bot_pid == 2373 --- 08:33.41 FORK(25380) !ERROR! cannot load my module: RSSFeeds 08:33.41 FORK(25380) fork: took 2s for RSSFeeds. 08:33.41 FORK(25380) --- fork finished for 'RSSFeeds' --- 08:34.09 Chans: (ghostbot) in:#ghostscript 08:39.39 ircCheck: possible lost in space; checking.Thu Nov 28 08:39:39 2013 08:39.39 >ghostbot< TEST 08:39.39 IRCTEST: Yes, we're alive. 08:50.25 >>> join/#ghostscript sojic (~sojic@92.55.124.148) 08:50.55 Chans: (ghostbot) in:#ghostscript 08:51.19 >>> join/#ghostscript sojic_ (~sojic@95.180.244.180) 08:54.59 >>> sojic has signed off IRC (Ping timeout: 246 seconds) [#ghostscript] 08:57.44 >>> part/#ghostscript sojic_ (~sojic@95.180.244.180) 09:03.01 --- Saved uptime records. 09:04.12 FORK(5439) --- fork starting for 'RSSFeeds', PID == 5439, bot_pid == 2373 --- 09:04.13 FORK(5439) !ERROR! cannot load my module: RSSFeeds 09:04.13 FORK(5439) fork: took 2s for RSSFeeds. 09:04.13 FORK(5439) --- fork finished for 'RSSFeeds' --- 09:07.31 Chans: (ghostbot) in:#ghostscript 09:09.17 >>> join/#ghostscript anddam (~andrea@199.19.224.42) 09:17.30 >>> kens has signed off IRC (Read error: Connection reset by peer) [#ghostscript] 09:23.11 Chans: (ghostbot) in:#ghostscript 09:29.28 >>> join/#ghostscript kens (~Miranda@93.182.125.91.dyn.plus.net) 09:34.32 FORK(12377) --- fork starting for 'RSSFeeds', PID == 12377, bot_pid == 2373 --- 09:34.33 FORK(12377) !ERROR! cannot load my module: RSSFeeds 09:34.33 FORK(12377) fork: took 2s for RSSFeeds. 09:34.33 FORK(12377) --- fork finished for 'RSSFeeds' --- 09:38.41 Chans: (ghostbot) in:#ghostscript 09:43.42 >>> join/#ghostscript sojic (~sojic@95.180.244.180) 09:43.52 ircCheck: possible lost in space; checking.Thu Nov 28 09:43:52 2013 09:43.52 >ghostbot< TEST 09:43.52 IRCTEST: Yes, we're alive. 09:44.53 >>> join/#ghostscript tor5 (d455594c@gateway/web/freenode/ip.212.85.89.76) 09:47.35 !WARN! PERL: readdir() attempted on invalid dirhandle DEBIAN at ./src/IRC/Schedulers.pl line 862. 09:47.35 !WARN! PERL: closedir() attempted on invalid dirhandle DEBIAN at ./src/IRC/Schedulers.pl line 869. 09:51.55 leak: 1 nuh{} items deleted; now have 26 09:53.15 >>> ghostbot has signed off IRC (Ping timeout: 260 seconds) [#ghostscript] 09:53.15 nickchange: own nick "ghostbot" became free; changing. 09:53.15 !ERROR! nick: nick == NULL. 09:53.15 ghostbot disconnect from irc.freenode.net (ERROR :Closing Link: casper3.ghostscript.com (Ping timeout: 260 seconds)). 09:53.15 !WARN! scheduling call ircCheck() in 60s 09:53.15 !WARN! Sched for ircCheck already exists in - 40s. 09:53.55 Chans: (ghostbot) join:#ghostscript 09:53.55 !FIXME! ircCheck: found channels to join! #ghostscript 09:53.55 joining #ghostscript 09:53.55 !WARN! PERL: Can't join() -- not connected to a server at ./src/IRC/Irc.pl line 537 09:53.57 -barjavel.freenode.net- *** Looking up your hostname... 09:53.57 -barjavel.freenode.net- *** Checking Ident 09:53.57 -barjavel.freenode.net- *** Found your hostname 09:54.07 -barjavel.freenode.net- *** No Ident response 09:54.07 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 09:54.07 !!! Ok. Now type '/msg ghostbot PASS ' to get master access through DCC CHAT. 09:54.07 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 09:54.07 End of motd. Now lets join some channels... 09:54.07 There are 208 users and 83679 invisible on 27 servers 09:54.07 31 IRC Operators online 09:54.07 4 unknown connection(s) 09:54.07 52805 channels formed 09:54.07 I have 5326 clients and 1 servers 09:54.08 >>> mode [+i] by ghostbot 09:54.13 >>> mode [+w] by ghostbot 09:59.11 !FIXME! ircCheck: found channels to join! #ghostscript 09:59.11 Chans: (ghostbot) join:#ghostscript 09:59.11 joining #ghostscript 09:59.11 >>> join/#ghostscript ghostbot (~ghostbot@casper3.ghostscript.com) 09:59.11 >>> topic/#ghostscript is Ghostscript development and discussion | live channel log at http://ghostscript.com/irclogs/ | Info at http://www.ghostscript.com 09:59.11 >>> set by ray_laptop!~chatzilla@69.233.158.225 at Tue Aug 23 15:22:21 2011 09:59.11 #ghostscript: sync in 0.151s. 09:59.11 #ghostscript: [26 total] 09:59.11 ChanServ ==> Requesting ops for #ghostscript. (chanServCheck) 09:59.11 >ChanServ< OP #ghostscript 09:59.12 ChanServ: <== 'You are not authorized to perform this operation.'. 09:59.22 Chans: (ghostbot) in:#ghostscript 09:59.22 time taken to join all chans: 5m 22s; rate: 32.2 sec/join 09:59.51 it's still there (in /home/git/ghostpdl.git/hooks/update.bak) if we want to re-enable it 10:00.45 I also think the cluster wanting a linear history to test (and not having to test everything twice, once for the real commit and once for the merge) was a factor in the policy 10:01.02 tor5: Does it get overridden if we do a forced push? 10:01.22 Seen: Flushed 2 entries. 10:01.30 Not testing twice sounds like a plan 10:03.08 chrisl: I don't think so 10:03.26 we could make it test user names, to only allow specific people to push merges 10:03.26 --- Saved uptime records. 10:04.39 FORK(22597) --- fork starting for 'RSSFeeds', PID == 22597, bot_pid == 2373 --- 10:04.40 FORK(22597) !ERROR! cannot load my module: RSSFeeds 10:04.40 FORK(22597) fork: took 1s for RSSFeeds. 10:04.40 FORK(22597) --- fork finished for 'RSSFeeds' --- 10:05.36 tor5: let's see what henrys thinks - it doesn't exactly crop up very often. 10:07.27 tor5: or we could create a "gs-merge" group on casper with just the artifex employees in the group, and check on that 10:08.21 chrisl: that would be good too 10:15.19 Chans: (ghostbot) in:#ghostscript 10:34.57 FORK(1041) --- fork starting for 'RSSFeeds', PID == 1041, bot_pid == 2373 --- 10:34.58 FORK(1041) !ERROR! cannot load my module: RSSFeeds 10:34.58 FORK(1041) fork: took 1s for RSSFeeds. 10:34.58 FORK(1041) --- fork finished for 'RSSFeeds' --- 11:01.41 LOG: last message repeated 3 times 11:01.41 Seen: Flushed 3 entries. 11:03.33 Chans: (ghostbot) in:#ghostscript 11:04.03 --- Saved uptime records. 11:05.13 FORK(12223) --- fork starting for 'RSSFeeds', PID == 12223, bot_pid == 2373 --- 11:05.14 FORK(12223) !ERROR! cannot load my module: RSSFeeds 11:05.14 FORK(12223) fork: took 1s for RSSFeeds. 11:05.14 FORK(12223) --- fork finished for 'RSSFeeds' --- 11:05.43 tor5: ping 11:05.51 >>> join/#ghostscript paulgardiner (~chatzilla@smtp.glidos.net) 11:06.02 morning paulgardiner 11:06.16 Hi 11:06.16 somebody said hello 11:06.16 niihau 11:08.24 Robin_Watts: so, bug 694810 ... an obviously broken PDF which we can handle if we run the xref repair 11:08.30 but detect that is broken too late. 11:08.52 I think we ought to catch certain classes of object loading errors and rebuild the xref if they trigger 11:09.10 also: pong :) 11:10.24 tor5: So, what's the state of play with us taking openjpeg etc from ghostpdl? 11:10.34 My memory is so crap :( 11:11.13 Shelly reports that that will solve all (or close to all) our remaining SEGVs in the fuzzing files. 11:12.06 I have a commit on my repo with such a change in it. 11:12.13 I can't remember why it was never pushed. 11:12.58 Robin_Watts: the openjpeg repo branch mess, IIRC 11:13.07 but that's only a vague recollection 11:13.24 we've got it set up to track upstream svn via git-svn 11:13.34 then there are patches on ghostscripts directory copy 11:14.04 tor5: I thought you had the gs copy being mirrored into a separate git repo automatically now ? 11:14.25 Robin_Watts: yeah, I think I set that up. let me just double check. 11:16.02 there was also something about tagging so we don't lose mupdf git history since we'll be dropping the branch we used to use in the submodule 11:19.21 Chans: (ghostbot) in:#ghostscript 11:20.27 Robin_Watts: okay, so it looks good to go to me. 11:20.43 I probably jsut forgot to give you the okay to push, and then we both forgot about it :) 11:21.10 let me just push a tag on the thirdparty/openjpeg.git to where we are now so we keep history 11:22.01 tor5: I'm just running a cluster test now to double check. 11:24.35 and then we should prune the working branches there too, I think 11:24.40 so it looks less confusing 11:26.22 we have 10 commits that are referenced from mupdf, I'll just check that they're all in a tagged reachable location so they don't get garbage collected 11:35.17 Chans: (ghostbot) in:#ghostscript 11:35.27 FORK(31555) --- fork starting for 'RSSFeeds', PID == 31555, bot_pid == 2373 --- 11:35.28 FORK(31555) !ERROR! cannot load my module: RSSFeeds 11:35.28 FORK(31555) fork: took 1s for RSSFeeds. 11:35.28 FORK(31555) --- fork finished for 'RSSFeeds' --- 11:47.39 373 diffs, just checking the bmpcmp now, but that number rings a bell. 11:51.11 Chans: (ghostbot) in:#ghostscript 11:55.54 >>> setmeaway has signed off IRC (Ping timeout: 246 seconds) [#ghostscript] 11:57.19 tor5: There are some other commits on my repo too. 11:57.45 2 in fact. 11:57.50 ignore the top 3. 12:01.51 Seen: Flushed 3 entries. 12:04.53 --- Saved uptime records. 12:06.15 FORK(15364) --- fork starting for 'RSSFeeds', PID == 15364, bot_pid == 2373 --- 12:06.16 FORK(15364) !ERROR! cannot load my module: RSSFeeds 12:06.16 FORK(15364) fork: took 1s for RSSFeeds. 12:06.16 FORK(15364) --- fork finished for 'RSSFeeds' --- 12:06.55 Chans: (ghostbot) in:#ghostscript 12:11.26 tor5: OK, bmpcmp looks good. I'll push it asap. 12:13.26 s/asap/as soon as you OK it/ 12:22.49 Chans: (ghostbot) in:#ghostscript 12:36.31 FORK(24111) --- fork starting for 'RSSFeeds', PID == 24111, bot_pid == 2373 --- 12:36.32 FORK(24111) !ERROR! cannot load my module: RSSFeeds 12:36.32 FORK(24111) fork: took 1s for RSSFeeds. 12:36.32 FORK(24111) --- fork finished for 'RSSFeeds' --- 13:02.05 Seen: Flushed 1 entries. 13:05.19 --- Saved uptime records. 13:06.59 FORK(1517) --- fork starting for 'RSSFeeds', PID == 1517, bot_pid == 2373 --- 13:07.00 FORK(1517) !ERROR! cannot load my module: RSSFeeds 13:07.00 FORK(1517) fork: took 1s for RSSFeeds. 13:07.00 FORK(1517) --- fork finished for 'RSSFeeds' --- 13:11.03 Chans: (ghostbot) in:#ghostscript 13:16.39 ircCheck: possible lost in space; checking.Thu Nov 28 13:16:39 2013 13:16.39 >ghostbot< TEST 13:16.39 IRCTEST: Yes, we're alive. 13:25.55 Robin_Watts : ping 13:27.26 Chans: (ghostbot) in:#ghostscript 13:37.19 FORK(13452) --- fork starting for 'RSSFeeds', PID == 13452, bot_pid == 2373 --- 13:37.20 FORK(13452) !ERROR! cannot load my module: RSSFeeds 13:37.20 FORK(13452) fork: took 1s for RSSFeeds. 13:37.20 FORK(13452) --- fork finished for 'RSSFeeds' --- 13:40.45 Robin_Watts: bottom 3 look good (bug fixes and openjpeg) 13:41.52 >>> kens has signed off IRC (Read error: Connection reset by peer) [#ghostscript] 13:44.25 Chans: (ghostbot) in:#ghostscript 13:47.16 >>> Micha` has signed off IRC (Ping timeout: 264 seconds) [#ghostscript] 13:47.59 !WARN! PERL: readdir() attempted on invalid dirhandle DEBIAN at ./src/IRC/Schedulers.pl line 862. 13:47.59 !WARN! PERL: closedir() attempted on invalid dirhandle DEBIAN at ./src/IRC/Schedulers.pl line 869. 13:53.30 tor5: ping 14:00.41 Chans: (ghostbot) in:#ghostscript 14:02.11 Seen: Flushed 3 entries. 14:02.46 >>> join/#ghostscript kens (~Miranda@93.182.125.91.dyn.plus.net) 14:03.56 paulgardiner: yes? 14:04.51 tor5: Thanks. 14:05.01 Robin_Watts : ping 14:05.02 Robin_Watts: there's a fix on tor/master for you as well 14:05.32 actually, I need to amend it first to deal with android, one min 14:05.41 tor5: I'm just trying to understand how the library part of the build is provoked for iOS. 14:05.41 --- Saved uptime records. 14:06.01 Since pinging, I discovered build_libs.sh 14:06.26 I need to pull in different a different js implementation 14:06.41 paulgardiner: ah, build_libs.sh as a "Run Script" external target 14:06.48 with a lot of voodoo to get the right build parameters 14:06.55 >>> join/#ghostscript oznt (~ozn@217.7.190.162) 14:06.59 hi guys 14:07.21 Robin_Watts: okay, now there's one for review 14:07.42 FORK(18142) --- fork starting for 'RSSFeeds', PID == 18142, bot_pid == 2373 --- 14:07.43 FORK(18142) !ERROR! cannot load my module: RSSFeeds 14:07.43 FORK(18142) fork: took 2s for RSSFeeds. 14:07.43 FORK(18142) --- fork finished for 'RSSFeeds' --- 14:07.45 please test that the android and win32 builds still work before approving it, I can't test those at the moment 14:07.51 i am trying to read pdf's table of contents , and the labels i get for the links are all of set by +1 , is there something i should know about labels in pdfs? 14:07.54 >>> join/#ghostscript sojic_ (~sojic@95.180.244.180) 14:08.14 oznt: page numbering starts at 0 14:08.26 in the internal mupdf functions 14:08.54 tor5: Xcode is doing its usual excellent job of hiding where the setting live within the menus 14:08.55 the various command line tools offset so that the user-visible pages start at 1 14:09.13 tor5: will do. 14:10.00 tor5, so my page numbering would have been -1 offset 14:10.25 oznt: are you using "mudraw -l" or fz_load_outline? 14:10.52 >>> sojic has signed off IRC (Ping timeout: 246 seconds) [#ghostscript] 14:12.37 tor5, mudraw is working fine 14:12.48 Which host has ghopstpdl origin/master ? 14:12.52 except that it outputs, page numbers, not labels 14:14.59 oznt: I'm sorry, then I don't really understand what you mean. which labels are wrong (and offset how?) 14:15.22 a specimen file to look at might help 14:15.26 what i mean is: when i open the pdf, it has some pages labeled "i, ii, v, x" (so the numbers are 1,2,5, 10) 14:15.30 kens: casper holds the golden repo. 14:15.36 if that's what you mean by 'origin', 14:15.52 Do: git remote -v 14:16.15 Robin_Watts : so why do I get a message about the server key not beiung cached when I try to use git pull ? 14:16.35 Chans: (ghostbot) in:#ghostscript 14:17.01 kens: hmm. no idea. 14:17.04 kens: sounds like ssh griping, does it warn if you run ssh manually from the git command line? 14:17.08 When did it last work? 14:17.16 tor5 : I can never run ssh from Msys git 14:17.23 tor5, can i output the labels like that? r 14:17.28 Robin_Watts : it still works on my desktop, but not my laptop 14:17.49 kens: Oh, right, that makes sense. 14:17.50 I can use Putty to ssh from windows and it did add the server id 14:18.08 oznt: oh, you mean the page number labels? sorry, we don't support those :) 14:18.14 That's cos casper moved IP address a while ago 14:18.22 oznt: we never bother to parse them 14:18.45 do git remote -v and tell me what the line for origin says. 14:18.50 Robin_Watts : this is a new laptop I'm setting up (or more accurately failing to set up) 14:18.59 I see. 14:19.14 tor5, ok, thanks, i was hoping for some salvation with mupdf ... i have to use poppler but it's documented awefuly ... 14:19.27 I think its a plink error I'm getting 14:19.56 kens: Probably. but I can't solve it until you do git remote -v and tell me what the line for origin says. 14:20.06 I believe I have verything I need for plink to work, but it keeps complaining the server's host key is no in the cache 14:20.09 oznt: it should be possible to read the /PageLabels entry of the catalog and add the feature relatively easily, but we've never really found a need for it 14:20.19 which isn't to say we will refuse a patch for it :) 14:20.45 tor5, I am working on a project where the client WANTS it 14:20.48 Robin_Watts : git remote -v says 14:20.48 ken@ghostscript.com:/home/git/ghostrpdl.git (fetch) 14:21.07 right. So do: plink ken@ghostscript.com 14:21.11 but ... i don't have enought time during this project for digging in the C code 14:21.38 Robin_Watts : that looks better 14:21.41 kens: with luck that should ask you about a key. 14:21.59 Once it's done that, you can then try git pull again. 14:22.11 yes and I told it ti accept it, now i can oull, thanks! 14:22.15 fab. 14:22.25 oznt: you could add a bug for it, marked as an enhancement, saying something to the effect of "make an API to access the PDF page labels" 14:22.29 * kens/#ghostscript wonders what other wrinkles I have yet to fall into 14:22.32 tor5: Android works, windows doesn't. 14:22.35 and maybe one of us will get to it on a lazy afternoon 14:22.39 I'll fix it after lunch. 14:22.50 Robin_Watts: okay. 14:23.25 or if you have a support contract, I'm sure we could rearrange priorities 14:23.41 the project is django based ... so I was thinking to parse the output of mudraw 14:23.41 can i ask you guys a general question about software developing ? I am a junior in the field ... so I am wondering 14:24.22 I will do ... 14:32.29 Chans: (ghostbot) in:#ghostscript 14:38.45 FORK(10106) --- fork starting for 'RSSFeeds', PID == 10106, bot_pid == 2373 --- 14:38.46 FORK(10106) !ERROR! cannot load my module: RSSFeeds 14:38.46 FORK(10106) fork: took 1s for RSSFeeds. 14:38.46 FORK(10106) --- fork finished for 'RSSFeeds' --- 14:42.14 >>> join/#ghostscript tor7 (~tor@212.85.89.76) 14:44.45 oznt: ask away 14:46.14 tor5, I read the code of mupdf a couple of time and it's quite well documented (at least the functions header), than I look into other C (FOSS) project and very often there are no comments at all 14:46.57 Some developers dislike comments 'because they are never current with the code' 14:47.04 am I expecting too much? I know the code should be self explaining ... so where is the border ? 14:47.24 because it takes effort to write them? 14:47.34 because people change the code, but not the comments 14:47.58 This is 'personal preference' stuff. 14:48.03 oznt: if you'd looked two years ago, you would have found much fewer comments in the mupdf code. we made a big drive to document it all once we reached a certain level of maturity. 14:48.09 code maturity, that is 14:48.16 Put 3 software engineers in a room and you'll get at least 4 opinions 14:48.36 Chans: (ghostbot) in:#ghostscript 14:49.57 well, i have to admit, I your code is good 14:50.40 You haven't looed at Gh... 14:50.48 GS 14:51.52 Abandon hope, all ye who enter GS..... 15:02.27 Seen: Flushed 7 entries. 15:04.17 Chans: (ghostbot) in:#ghostscript 15:05.49 --- Saved uptime records. 15:09.13 FORK(28312) --- fork starting for 'RSSFeeds', PID == 28312, bot_pid == 2373 --- 15:09.14 FORK(28312) !ERROR! cannot load my module: RSSFeeds 15:09.14 FORK(28312) fork: took 1s for RSSFeeds. 15:09.14 FORK(28312) --- fork finished for 'RSSFeeds' --- 15:20.13 Chans: (ghostbot) in:#ghostscript 15:23.02 >>> sojic_ has signed off IRC (Ping timeout: 264 seconds) [#ghostscript] 15:35.47 Chans: (ghostbot) in:#ghostscript 15:39.11 >>> tor5 has signed off IRC (Ping timeout: 250 seconds) [#ghostscript] 15:39.13 >>> tor7 has signed off IRC (Read error: Connection reset by peer) [#ghostscript] 15:39.23 FORK(5218) --- fork starting for 'RSSFeeds', PID == 5218, bot_pid == 2373 --- 15:39.24 FORK(5218) !ERROR! cannot load my module: RSSFeeds 15:39.24 FORK(5218) fork: took 1s for RSSFeeds. 15:39.24 FORK(5218) --- fork finished for 'RSSFeeds' --- 15:51.51 Chans: (ghostbot) in:#ghostscript 15:55.53 >>> join/#ghostscript tor7 (~tor@212.85.89.76) 15:57.47 ircCheck: possible lost in space; checking.Thu Nov 28 15:57:47 2013 15:57.47 >ghostbot< TEST 15:57.47 IRCTEST: Yes, we're alive. 16:00.18 tor7: How is the jbig2dec handled? 16:00.30 you mean the git? 16:00.32 Is that similarly extracted from gs to the standalone repo? 16:00.44 yeah, exact same way as openjpeg is now. 16:00.59 bug 694362 - apparently there is stuff we haven't pulled in. 16:01.06 crontab job extracts the subdirectories, and pulls them into the gits 16:01.14 probably just requires us to update the submodule. 16:01.17 I will look at that. 16:01.37 Linux builds are failing :( 16:01.40 yeah, we have to manually bump the mupdf/thirdparty/jbig2dec submodule 16:01.59 Robin_Watts: on origin/master? 16:02.02 I suspect your commit and my openjpeg commit didn't agree with one another. I will fix. 16:02.05 on golden/master. 16:02.12 I will fix and force-push. 16:02.35 Seen: Flushed 2 entries. 16:02.36 yeah, something's bust 16:03.15 yeah, the merge of Makethird is probably off with the OPENJPEG_CFLAGS 16:04.22 I see it. 16:06.27 --- Saved uptime records. 16:08.19 Chans: (ghostbot) in:#ghostscript 16:10.21 FORK(3317) --- fork starting for 'RSSFeeds', PID == 3317, bot_pid == 2373 --- 16:10.23 FORK(3317) !ERROR! cannot load my module: RSSFeeds 16:10.23 FORK(3317) fork: took 2s for RSSFeeds. 16:10.23 FORK(3317) --- fork finished for 'RSSFeeds' --- 16:14.01 >>> join/#ghostscript mace (~mace@debian/developer/mace) 16:14.58 >>> join/#ghostscript sojic (~sojic@92.55.124.154) 16:16.06 kens, chrisl: Were lexmark t640's among the b0rked printers that had problems with postscript? 16:16.15 kens/chrisl: robin kindly suggested i ask this here, on the off chance you guys can suggest a fix.. i'm trying to get a lexmark t640 set up with cups, but i'm getting wierd behaviour.. first test page prints ok, second test page prints ok too but is preceeded by a page with "ageLevel: 2" at the top. this makes me suspect that the first job isn't being fully processed, and robin mentioned that there was a hack/workaround needed 16:16.23 Robin_Watts is more succinct ;) 16:17.12 tbh, I can't remember..... 16:17.17 mace: Ah, well, I didn't know all the details :) 16:17.24 We've fixed a few problems, working around broken PostScript implementations,but that doesn't sound like any bug we've seen 16:17.40 ISTR that the problems we had reported were more like indefinite hangs, or much worse crashes than that. 16:17.47 right 16:17.49 what happens if you run the PostScript file through GS on its own ? 16:17.58 Robin_Watts: No, we've had strange errors, too 16:18.01 tkamppeter_ is the CUPS guru. 16:18.08 chrisl: OK, I'll shut up here then :) 16:18.21 kens: i've not tried, will try and figure out if i can do that ;) 16:18.32 mace can you send us the intermediate PostScript file ? 16:18.41 Robin_Watts: well, you right in that *most* have been freezes or crashes 16:18.46 OOh, and are you sending PostScript or PDF to Cups ? 16:19.14 Also, where/how are you generating the test page ? 16:19.52 i've tried two methods, hitting the "test page" button in cups, and running the lp command to print a text file 16:20.20 Hmm, I have no idea what cups does if you ask it to printa test page :-) 16:20.27 nor i :) 16:21.02 I suspect it has a PDF stashed somewhere, and tosses that to the printer - I'll have a quick look 16:21.07 Probably the first thing to do is capture the file that gets sent to your printer 16:21.37 THat will (shoudl be) PostScript, presumably generated by GS. I should also ask which version of GS you are using ? 16:22.07 That 'PageLevel' kind of looks like a DSC comment 16:22.51 ageLevel, not PageLevel.. quick look at the postscript spec makes me suspect LanguageLevel, but I know nothing :) 16:23.13 found some pdf's, sec 16:23.40 The cups test page does seem to be a stashed PDF file 16:24.20 >>> kens has signed off IRC (Read error: No route to host) [#ghostscript] 16:24.40 Chans: (ghostbot) in:#ghostscript 16:24.41 >>> join/#ghostscript kens (~Miranda@93.182.125.91.dyn.plus.net) 16:24.46 mace: this should give you the steps to capture the PS going to the printer: https://wiki.ubuntu.com/DebuggingPrintingProblems#Getting_the_data_which_would_go_to_the_printer 16:25.31 will do 16:25.32 That 'ageLevel' could be the end of a 'LanguageLevel' DSC comment 16:26.42 A quick check and we do emit a %%LanguageLevel: 2 comment in the ps2write output 16:28.16 Hrm, the "printer settings" on this computer seems to have gone AWOL..... 16:28.35 just trying the 'raw' printing thing via lp to see if it's reproducable with that 16:29.29 ok that seems to cause other problems 16:30.39 mace: what are you sending "raw" to the printer? 16:31.04 text file 16:31.17 You cna't send a text file to a PostScript printer 16:31.25 It will give you all kinds of errors 16:31.49 >>> join/#ghostscript sojic_ (~sojic@95.180.244.180) 16:31.50 well its going via cups still, but without whatever filters -oraw disables 16:32.08 i digress anyhow, will get the intermediate postscript for you 16:32.08 I would imagine -oraw means 'send this directo to the printer' 16:32.21 mace: -oraw disables *all* the filter - it sends exactly the input to the printer 16:33.03 right, that's what it looked like 16:33.25 It *might* "work" if the printer also supports PCL5 16:33.35 Yes true 16:34.30 It says it handles PCL6 16:34.42 Also PDF 1.5 and PS 3 16:34.57 as well as something called PersonalPrinter Data Stream 16:35.06 Yeh, it depends whether it needs PJL and any other preamble before the "PCL" 16:35.25 >>> sojic has signed off IRC (Ping timeout: 246 seconds) [#ghostscript] 16:35.28 I would guess it probably does, given the range of possible inputs 16:36.10 A lot of printers default to PCL5 if they can't identify the input by other means 16:36.16 OK PPDS ios some kind of IBM specific thingy 16:36.38 Its a mere 32 years old 16:37.55 ok i've gotten this output, what would you like me to do with it? :) 16:38.16 Put it somewhere that we can look at it 16:39.26 good answer 16:39.54 mace: if you haven't got somewhere convenient, you can mail it to me, and I'll put it somewhere 16:40.34 FORK(22563) --- fork starting for 'RSSFeeds', PID == 22563, bot_pid == 2373 --- 16:40.35 FORK(22563) !ERROR! cannot load my module: RSSFeeds 16:40.35 FORK(22563) fork: took 1s for RSSFeeds. 16:40.35 FORK(22563) --- fork finished for 'RSSFeeds' --- 16:40.52 http://dsis.it/printout 16:41.12 Chans: (ghostbot) in:#ghostscript 16:41.15 Forbidden You don't have permission to access /printout on this server. 16:41.43 fixed, sorry 16:41.56 That's an old version of GS, 9.05 16:42.02 You could try a newer one 16:42.14 it's the one in current debian stable 16:42.24 Yep, but its still old 16:42.28 i'll have a look 16:43.09 hm, 9.05 is the latest even in debian unstable 16:43.27 9.10 was release back in August.... 16:43.58 neat, last unstable release was july, damn debian developers :) 16:44.06 Well, the one page file processes correctly on 3 different interpreters for me 16:44.36 out of interest, if i send that file to the printer raw, will that work as expected? 16:44.43 Try it, it should 16:45.00 You say you're getting *2* pages out of this ? 16:45.09 But it should work anyway 16:45.31 mace, how many pages does your printer print ? 16:46.13 ok sending that raw to the usb lp port gives 1 page as it should 16:46.29 i was getting 1 page the first time around, then 2 pages the second time around 16:46.34 via cups etc 16:46.47 That's strange. 16:46.56 WHat was on the two pages when you got 2 pages out ? 16:47.25 first page had just "ageLevel: 2" 16:47.30 second page looked correct 16:47.40 >>> tkamppeter_ materializes into tkamppeter 16:47.49 I'm at a loss to explain that..... 16:48.28 That smacks of a comms error rather than a GS type problem - although, who knows.... 16:48.53 mace: does the printer have a network connection? 16:48.58 ah, i'm making some progress now 16:49.01 chrisl: sadly not 16:49.16 ok so catting that PS to the lp port multiple times works fine 16:49.42 printing that PS via lp -oraw does the 2 page thing 16:49.53 >>> sojic_ has signed off IRC (Ping timeout: 272 seconds) [#ghostscript] 16:50.07 so i guess that means it's something to do with cups itself, not with ghostscript et al? 16:50.07 mace, also follow the instrctions on https://wiki.ubuntu.com/DebuggingPrintingProblems#PostScript_.28PDF.29_printer_chokes_on_the_PostScript_.28PDF.29_coming_from_Ubuntu 16:50.21 mace: hmm, yes, that rather points the finger at cups rather than GS 16:50.25 Well, either the output is different the second time cups sends it, or its something odd with comms 16:50.42 >>> join/#ghostscript sojic (~sojic@95.180.244.180) 16:51.09 kens: i tried printing the GS file whilst redirecting to file.. the new output was identical to the original 16:52.08 mace, so it sounds like gs is behaving as it should. 16:52.27 and it's something in cups that's bu{ff,gg}ering the file as it sends it to the printer. 16:52.30 yeah, as expected.. i trust you folks more than i trust cups :) 16:52.47 Its hard tro see how it could be GS, or the PostScript produced by GS, given the tests you;ve run 16:53.04 I'm surprised there is no PJL in the data being sent to the printer, given the multiple PDLs the printer supports 16:53.28 chrisl: Well, maybe cups is introducing such extra stuff, and that's what's going wrong? 16:53.52 Robin_Watts: this *should* the exact data going to the printer, cups additions and all 16:53.57 tkamppeter: that step 10 works fine 16:54.22 tkamppeter: lp -opsdebug on that GS file reliably prints 1 page each time 16:54.40 Indeed, the device specific setup stuff is in the PS (which comes from cups not GS) 16:54.53 chrisl sending the PS file directly seemed to work. Maybe the pritners processor can detect PS files 16:55.02 tor7: How often does the gs -> jbig2dec thing run? 16:55.17 kens: yeh, it must be - I'm just surprised. 16:55.57 mace: it could be a USB issue, too. Maybe adding/removing a hub, different port etc? 16:56.03 Robin_Watts: daily 16:56.14 but I can trigger a manual run should you want it 16:56.41 (it's a pretty heavy job, I don't want to waste too many CPU hours on it) 16:57.11 tor7: could you trigger one please? 16:57.11 Chans: (ghostbot) in:#ghostscript 16:57.32 mace, chrisl, what we can do is adding a quirk exception to the pdftops filter in cups-filters to send uncompressed PS for Lexmark printers. chrisl, if there is any better solution, please tell me. 16:57.33 Robin_Watts: it's running... 16:57.45 Thanks. 16:57.47 check the gits in a couple of minutes 16:57.50 chrisl: that might be it actually.. i'm seeing usb disconnects in the kernel log 16:58.30 Shelly reports that the problem should be solved with a couple of patches - but all those patches are now included and I think I'm still seeing the problem. 16:58.44 >>> sojic has signed off IRC (Ping timeout: 240 seconds) [#ghostscript] 16:58.52 tkamppeter: but sending the compressed PS directly to the port worked correctly, it seems, so that's not likely to be the root of the problem 16:59.24 I would have to agree, I don't see how it can be the PostScript itself 17:00.05 tkamppeter: I'm wondering if the two methods (directly to the port, and via cups) are driving the USB subsystem in subtly different ways - hence one way seeing the problem, the other not 17:00.22 But that's well beyond my area of expertise...... 17:01.33 >>> join/#ghostscript Noldorin (~noldorin@unaffiliated/noldorin) 17:02.33 Well, if the worst comes to the worst, I can get a refurbed T640 for 75UKP....... 17:02.54 Seen: Flushed 6 entries. 17:03.58 At the oment I have to say it doesn't seem like its us. 17:05.19 >>> join/#ghostscript sojic (~sojic@95.180.244.180) 17:05.39 No, I don't think so. But if sending uncompressed data gets around mace's (guessing!) USB issue, then he could stick with that 17:05.53 * mace/#ghostscript nods 17:05.59 just trying various cable swaps 17:06.31 still getting usb disconnects 17:06.31 --- Saved uptime records. 17:06.45 mace: another thought would another computer if you have one handy to test 17:06.54 yeah i might try that next 17:07.56 'Course, it might be a problem with the printer's USB, in which case...... 17:08.08 open window. discard ;) 17:08.39 chrisl: The fact that the printer can be sent data safely just by raw catting would seem to suggest that the printer itself is OK. 17:09.08 Ah, the last few changes DO seem to have fixed it. 17:09.27 (the MuPDF jbig2 thing, not mace's thing, obviously) 17:10.07 Robin_Watts: like I said, unless the two "routes" for data are driving the USB in slightly different ways - don't know enough about USB to know if that makes any sense 17:11.07 FORK(16230) --- fork starting for 'RSSFeeds', PID == 16230, bot_pid == 2373 --- 17:11.09 FORK(16230) !ERROR! cannot load my module: RSSFeeds 17:11.09 FORK(16230) fork: took 2s for RSSFeeds. 17:11.09 FORK(16230) --- fork finished for 'RSSFeeds' --- 17:11.56 mace: erm, did you notice the next section in the web page a post above? "USB printer does not print or prints garbage" 17:12.40 tor7: I've got another mupdf commit ready. Its just another submodule update for jbig2dec. Seems to solve the problems. 17:13.30 Chans: (ghostbot) in:#ghostscript 17:13.38 chrisl: i did, i tried the first workaround, but not the second, will try that in a minute. i've just tried connecting to a different computer and get the same usb disconnects when cups prints 17:14.58 mace: okay, just checking - I would hate for us to miss something "obvious" 17:15.25 either way, i think gs is innocent 17:16.09 ah, i think they are not usb disconnects, but usblp being detached 17:20.27 so, the second usb hack there seems to be working ok from linux 17:21.52 Fingers crossed - I like happy endings :-) 17:22.08 :) 17:22.12 now to try from xp 17:22.31 Oh, well we definitely can't take the blame there! 17:22.44 nope, but you have been most helpful thanks :) 17:23.16 NP. I'm just glad it wasn't us 17:24.34 oh, it's Thanksgiving today. 17:24.45 Yes 17:25.07 Oh, 'course it is.... 17:29.43 Chans: (ghostbot) in:#ghostscript 17:33.08 >>> sojic has signed off IRC (Remote host closed the connection) [#ghostscript] 17:34.59 >>> Noldorin has signed off IRC (Quit: Computer has gone to sleep.) [#ghostscript] 17:35.25 >>> join/#ghostscript Noldorin (~noldorin@unaffiliated/noldorin) 17:40.04 xp works too 17:40.09 what a mission :| 17:41.19 mace: if the problem had turned out to the GS output, *that* would have been a real mission! It's a nightmare to debug problems like that, and much, much worse doing it by remote (lack of) control 17:41.49 FORK(31601) --- fork starting for 'RSSFeeds', PID == 31601, bot_pid == 2373 --- 17:41.50 FORK(31601) !ERROR! cannot load my module: RSSFeeds 17:41.50 FORK(31601) fork: took 1s for RSSFeeds. 17:41.50 FORK(31601) --- fork finished for 'RSSFeeds' --- 17:44.25 * mace/#ghostscript nods 17:44.33 well thanks again :) 17:44.42 * mace/#ghostscript moves onto the next impossible task 17:44.52 Have fun ;-) 17:46.19 Chans: (ghostbot) in:#ghostscript 17:48.21 !WARN! PERL: readdir() attempted on invalid dirhandle DEBIAN at ./src/IRC/Schedulers.pl line 862. 17:48.21 !WARN! PERL: closedir() attempted on invalid dirhandle DEBIAN at ./src/IRC/Schedulers.pl line 869. 17:55.25 >>> kens has signed off IRC (Quit: Miranda IM! Smaller, Faster, Easier. http://miranda-im.org) [#ghostscript] 18:02.03 Chans: (ghostbot) in:#ghostscript 18:02.53 chrisl, mace, perhaps it is a USB oproblem, directly to the port usually goes through the usblp kernel module, CUPS uses libusb. 18:03.14 Seen: Flushed 5 entries. 18:03.29 mace, can you follow the instructions of https://wiki.ubuntu.com/DebuggingPrintingProblems#USB_printer_does_not_print_or_prints_garbage 18:06.57 --- Saved uptime records. 18:07.17 tkamppeter: which aspect? 18:07.59 tkamppeter: i applied step 3 and it seems to have fixed the problem 18:12.01 FORK(28307) --- fork starting for 'RSSFeeds', PID == 28307, bot_pid == 2373 --- 18:12.02 FORK(28307) !ERROR! cannot load my module: RSSFeeds 18:12.02 FORK(28307) fork: took 1s for RSSFeeds. 18:12.02 FORK(28307) --- fork finished for 'RSSFeeds' --- 18:18.37 Chans: (ghostbot) in:#ghostscript 18:41.04 LOG: last message repeated 3 times 18:41.04 >>> join/#ghostscript mvrhel_laptop (~chatzilla@174.47.67.2) 18:42.05 FORK(6719) --- fork starting for 'RSSFeeds', PID == 6719, bot_pid == 2373 --- 18:42.06 FORK(6719) !ERROR! cannot load my module: RSSFeeds 18:42.06 FORK(6719) fork: took 1s for RSSFeeds. 18:42.06 FORK(6719) --- fork finished for 'RSSFeeds' --- 18:43.17 >>> plinnell has signed off IRC (Read error: Connection reset by peer) [#ghostscript] 18:45.28 tor7: Yet another jbig2dec update on robin/master 18:45.42 mvrhel_laptop: Happy thanksgiving. 18:46.05 morning Robin_Watts thanks 18:48.14 >>> join/#ghostscript plinnell (~mrdocs@c-76-102-153-54.hsd1.ca.comcast.net) 18:48.14 >>> plinnell has signed off IRC (Changing host) [#ghostscript] 18:48.14 >>> join/#ghostscript plinnell (~mrdocs@opensuse/member/mrdocs) 18:49.57 Chans: (ghostbot) in:#ghostscript 18:59.41 >>> Noldorin has signed off IRC (Quit: Computer has gone to sleep.) [#ghostscript] 19:02.54 >>> chrisl materializes into chrisl_away 19:03.34 Seen: Flushed 4 entries. 19:06.11 Chans: (ghostbot) in:#ghostscript 19:07.53 --- Saved uptime records. 19:09.51 mace, thank you, this means that CUPS' USB backend will get a quirk rule to solve your problem. 19:10.40 mace, what is your exact printer model and what is the output of "lsusb" (USB vendor and product ID of your printer)? 19:11.42 mace, and which version of CUPS are you using? 19:12.42 FORK(8053) --- fork starting for 'RSSFeeds', PID == 8053, bot_pid == 2373 --- 19:12.43 FORK(8053) !ERROR! cannot load my module: RSSFeeds 19:12.43 FORK(8053) fork: took 1s for RSSFeeds. 19:12.43 FORK(8053) --- fork finished for 'RSSFeeds' --- 19:21.35 Chans: (ghostbot) in:#ghostscript 19:28.35 >>> mvrhel_laptop has signed off IRC (Ping timeout: 272 seconds) [#ghostscript] 19:37.39 Chans: (ghostbot) in:#ghostscript 19:43.05 FORK(18349) --- fork starting for 'RSSFeeds', PID == 18349, bot_pid == 2373 --- 19:43.06 FORK(18349) !ERROR! cannot load my module: RSSFeeds 19:43.06 FORK(18349) fork: took 1s for RSSFeeds. 19:43.06 FORK(18349) --- fork finished for 'RSSFeeds' --- 19:47.48 >>> join/#ghostscript Noldorin (~noldorin@unaffiliated/noldorin) 19:49.29 >>> tor7 has signed off IRC (Ping timeout: 246 seconds) [#ghostscript] 19:53.13 Chans: (ghostbot) in:#ghostscript 20:03.43 Seen: Flushed 1 entries. 20:03.49 >>> join/#ghostscript tor7 (~tor@212.85.89.76) 20:05.25 hi tor7. 20:05.45 1 more jbig2 import thing on robin/master 20:07.57 --- Saved uptime records. 20:09.29 Chans: (ghostbot) in:#ghostscript 20:13.13 FORK(25890) --- fork starting for 'RSSFeeds', PID == 25890, bot_pid == 2373 --- 20:13.14 FORK(25890) !ERROR! cannot load my module: RSSFeeds 20:13.14 FORK(25890) fork: took 1s for RSSFeeds. 20:13.14 FORK(25890) --- fork finished for 'RSSFeeds' --- 20:23.08 >>> saper has signed off IRC (Remote host closed the connection) [#ghostscript] 20:25.03 Chans: (ghostbot) in:#ghostscript 20:27.32 >>> join/#ghostscript saper (saper@wikipedia/saper) 20:41.07 Chans: (ghostbot) in:#ghostscript 20:43.19 FORK(28596) --- fork starting for 'RSSFeeds', PID == 28596, bot_pid == 2373 --- 20:43.20 FORK(28596) !ERROR! cannot load my module: RSSFeeds 20:43.20 FORK(28596) fork: took 1s for RSSFeeds. 20:43.20 FORK(28596) --- fork finished for 'RSSFeeds' --- 20:53.13 >>> part/#ghostscript anddam (~andrea@199.19.224.42) 20:56.18 >>> Noldorin has signed off IRC (Quit: Computer has gone to sleep.) [#ghostscript] 20:57.43 Chans: (ghostbot) in:#ghostscript 21:03.59 Seen: Flushed 1 entries. 21:08.04 >>> join/#ghostscript Noldorin (~noldorin@unaffiliated/noldorin) 21:08.14 --- Saved uptime records. 21:08.34 ircCheck: possible lost in space; checking.Thu Nov 28 21:08:34 2013 21:08.34 >ghostbot< TEST 21:08.34 IRCTEST: Yes, we're alive. 21:13.39 FORK(5509) --- fork starting for 'RSSFeeds', PID == 5509, bot_pid == 2373 --- 21:13.40 FORK(5509) !ERROR! cannot load my module: RSSFeeds 21:13.40 FORK(5509) fork: took 1s for RSSFeeds. 21:13.40 FORK(5509) --- fork finished for 'RSSFeeds' --- 21:13.49 Chans: (ghostbot) in:#ghostscript 21:19.40 >>> join/#ghostscript sojic (~sojic@92.55.124.146) 21:29.33 Chans: (ghostbot) in:#ghostscript 21:32.59 >>> join/#ghostscript setmeaway (stemearay@118.45.149.241) 21:44.07 FORK(18385) --- fork starting for 'RSSFeeds', PID == 18385, bot_pid == 2373 --- 21:44.08 FORK(18385) !ERROR! cannot load my module: RSSFeeds 21:44.08 FORK(18385) fork: took 1s for RSSFeeds. 21:44.08 FORK(18385) --- fork finished for 'RSSFeeds' --- 21:45.07 Chans: (ghostbot) in:#ghostscript 21:48.51 !WARN! PERL: readdir() attempted on invalid dirhandle DEBIAN at ./src/IRC/Schedulers.pl line 862. 21:48.51 !WARN! PERL: closedir() attempted on invalid dirhandle DEBIAN at ./src/IRC/Schedulers.pl line 869. 21:52.23 leak: 1 nuh{} items deleted; now have 27 21:58.31 Robin_Watts: okay, jbig2dec changes LGTM 22:00.35 >>> tor7 has signed off IRC (Remote host closed the connection) [#ghostscript] 22:00.45 Chans: (ghostbot) in:#ghostscript 22:04.15 Seen: Flushed 1 entries. 22:08.39 --- Saved uptime records. 22:10.26 >>> sojic has signed off IRC (Remote host closed the connection) [#ghostscript] 22:14.15 >>> join/#ghostscript sojic (~sojic@92.55.124.146) 22:14.35 FORK(26983) --- fork starting for 'RSSFeeds', PID == 26983, bot_pid == 2373 --- 22:14.36 FORK(26983) !ERROR! cannot load my module: RSSFeeds 22:14.36 FORK(26983) fork: took 1s for RSSFeeds. 22:14.36 FORK(26983) --- fork finished for 'RSSFeeds' --- 22:17.17 Chans: (ghostbot) in:#ghostscript 22:27.11 >>> sojic has signed off IRC (Ping timeout: 272 seconds) [#ghostscript] 22:33.51 Chans: (ghostbot) in:#ghostscript 22:42.36 >>> join/#ghostscript mrdocs (~mrdocs@c-76-102-153-54.hsd1.ca.comcast.net) 22:42.36 >>> mrdocs has signed off IRC (Changing host) [#ghostscript] 22:42.36 >>> join/#ghostscript mrdocs (~mrdocs@opensuse/member/mrdocs) 22:44.07 >>> plinnell has signed off IRC (Ping timeout: 252 seconds) [#ghostscript] 22:44.47 FORK(768) --- fork starting for 'RSSFeeds', PID == 768, bot_pid == 2373 --- 22:44.48 FORK(768) !ERROR! cannot load my module: RSSFeeds 22:44.48 FORK(768) fork: took 1s for RSSFeeds. 22:44.48 FORK(768) --- fork finished for 'RSSFeeds' --- 22:48.05 >>> join/#ghostscript mvrhel_laptop (~chatzilla@174.47.67.2) 22:49.47 Chans: (ghostbot) in:#ghostscript 23:00.25 ircCheck: possible lost in space; checking.Thu Nov 28 23:00:25 2013 23:00.25 >ghostbot< TEST 23:00.25 IRCTEST: Yes, we're alive. 23:05.29 Chans: (ghostbot) in:#ghostscript 23:08.41 --- Saved uptime records. 23:15.38 FORK(18536) --- fork starting for 'RSSFeeds', PID == 18536, bot_pid == 2373 --- 23:15.39 FORK(18536) !ERROR! cannot load my module: RSSFeeds 23:15.39 FORK(18536) fork: took 2s for RSSFeeds. 23:15.39 FORK(18536) --- fork finished for 'RSSFeeds' --- 23:21.13 Chans: (ghostbot) in:#ghostscript 23:23.31 >>> paulgardiner has signed off IRC (Quit: ChatZilla 0.9.90.1 [Firefox 25.0.1/20131112160018]) [#ghostscript] 23:36.57 Chans: (ghostbot) in:#ghostscript 23:39.05 >>> join/#ghostscript sojic (~sojic@92.55.124.146) 23:45.55 FORK(27444) --- fork starting for 'RSSFeeds', PID == 27444, bot_pid == 2373 --- 23:45.56 FORK(27444) !ERROR! cannot load my module: RSSFeeds 23:45.56 FORK(27444) fork: took 1s for RSSFeeds. 23:45.56 FORK(27444) --- fork finished for 'RSSFeeds' --- 23:51.05 >>> mrdocs materializes into plinnell 23:52.45 Chans: (ghostbot) in:#ghostscript